• Developed to respond effectively to curing up to 140 ° C / 10min. • Low curing capacity permits CO2 reduction by maintenance of current oven temperature for massive parts. • The low concentration of free amine engenders a lower COD (Chemical Oxygen Demand) and extends modules life. • Contains necessary patented agents to avoid proliferation of bacteria. Therefore: - There is no need to add biocides in frequency to the bath (where good quality of demineralized water is employed). o Serial life of UF cartridges is extended. • It must be noted a 70% drop in purges of the anolyte circuit which engenders a lower COD. • POWERNICS 1400TF Low Bake retains a light gray tint after baking, allowing for optimal color and thickness of the Topcoat. • It also maintains a high surface tension, providing better adhesion of topcoats.
Low Baking Performance 140°C / Saving your cost. Achieved Renault, Stellantis, Volkswagen, Audi, and other car manufacturers corrosion specification. Saving factory energy cost at E-coat baking process. Excellent edge corrosion performance. Easy Thickness Adjustment / Multi Use Type. Easy Adjustment 15μm → up to 50μm for all types of parts. Maintenance Free Concept. No need regular biocide feeding. No need regular UF purge. Improve stone-chipping resistance. Designed as a tough and soft coating film to reduce the scars and the coating film falling off caused by bending. Environmentally Friendly Design. Tin Free formula.